SABEU develops and manufactures its own microporous filter membranes under the TRAKETCH® brand and customizes membranes for different filtration solutions.
The products are used for filtration, sealing and degassing of chemicals as well as the sterile venting in life sciences and medical technology applications, e.g. solutions for mobile diagnostics, monitoring and therapy systems.
The projects are realized in-house, from the product development, to the automation process, production, surface finishing, lamination and assembly.
The possibility to develop and manufacture molding tools and injection-molded components aside from membranes and to process them further to obtain a finished packaged product, enables us to offer our customers outstanding quality assurance, simplified sourcing processes and therefore fast processes and optimized cost structures.
The 10 µm thin TRAKETCH® PC disc with a diameter of 47 mm is used with pore sizes of 0.2 µm or 0.4 µm.
A typical application in water analysis: a membrane is used as a method to detect legionellae. Because of the precisely defined pores, all legionellae stay on the surface of the membrane. As a result, not only can they be quantified, but they can also be analyzed under a microscope.
In some methods, the membrane is folded in test tubes to carry out further analysis. For this reason, the 10 µm thin tracketch membranes are preferably used.
The TRAKETCH® PET vent filter membrane has two functions: firstly, to ensure that the air is free of pathogens and secondly, to prevent draining of the cell culture medium. Cell cultures require an adequate supply of fresh air. In so doing, no contaminants may be introduced to the cells from the outside.
Visit brand website: cellqart.com
With our cellQART® Cell Culture Inserts we are dedicated to resolve the dilemma of customer needs for innovative cell culture products meeting highest standards at affordable prices.
This product portfolio will come with PET membranes in translucent or clear optics and 6-, 12- or 24-Well format which is compatible with most standard Cell Culture Plates. Our standard portfolio includes pore sizes from 0.4 μm to 8.0 μm with various pore densities.
Project based customization (especially alternative membranes, e.g. black colored or further pore sizes) is possible due to 100 % in-house production of plastics & membrane components.
All Inserts are TC treated and gamma sterilized in general as well as RNase / DNase free and non-pyrogenic. With our industry leading quality standards we ensure 100 % membrane parameter consistency for reproducible cell culture results.
Using the membrane filter method, a sample is filtered through a TRAKETCH® membrane. All microorganisms in a 100 ml sample solution are concentrated and retained completely (100%) on the membrane surface.
Detection is performed directly on the membrane by adding a fluorescent dye which can only penetrate through intact cell walls (living organisms). To ensure adequate measurement of the emitted fluorescence after stimulation by a laser, the membrane should have a low fluorescence. Otherwise we would see "a white image on a white background", i.e. we would only see a fluorescence of the entire surface.
To avoid this, SABEU stains this membrane in deep black to quench the fluorescence in defined ranges of wavelengths. This entire microbiological detection method is called solid phase cytometry, in which the membrane represents the solid phase. This method is not only rapid, but also in real time, i.e. within just 1–2 hours. In comparison, the growth of microcolonies takes 1–2 days, whereas growing visible colonies takes 1–2 weeks, depending on the microorganism.
Vents consist of hydrophobic and oleophobic membranes, which balance out pressure differences, while at the same time reliably holding back moisture and particles from the outside. Vents protect e.g. sensors in electronic housings or remove the air from oxidizing chemicals in chemical packaging.
TRAKETCH® membranes by SABEU are mainly used for the filtration as well as for venting in a number of applications and markets - predominantly in the medical membrane, laboratory analysis, bio technology as well as the chemical and pharmaceutical packaging, the automotive and electronics industries.
The properties of ion track membranes can be adjusted to match the specific application, and, as a result of the manufacturing process, they are always characterized by a pore structure that is uniform and within close tolerances. The pore sizes can vary from 0.03 µm to 15 µm.
With medical filters performance data such as air flow and water pressure can be adjusted in accordance with the requirements of the application within the scope of the technical specifications. The membranes can then be further processed by SABEU, e.g. welded in plastic components
We modify the properties of untreated tracketch membranes or other polymer membranes by means of different surface treatments, depending on the requirement. Some examples are:
For stabilization and optimized handling, all membranes types (e.g. PTFE or TRAKETCH) can be laminated with different types of non-woven fibers. The heat lamination does not require glue when the fibers are made from poly propylene or PET. The composite material then has a total thickness of 100 µm to 500 µm and can be processed optimally in e.g. automated cutting and welding equipment.
Depending on the application, TRAKETCH and PTFE filter membranes can be produced as rolls, sheets, punched round discs or in other outlines and shapes. Further processing into adhesive pads supplied on liners are other options.
Roll widths from 8 mm to 300 mm
Typical sheet sizes are 8 x 10” (200 x 250 mm)
Typical disc diameters are: 13 mm (0.5”)
25 mm (1”)
90 mm (3.5”)
293 mm (11.5”)
Other sizes are available upon request
For the assembly of membranes (e.g. PET, PTFE and PC), SABEU develops tailor-made production designs based on specifications. They guarantee a high availability and a secure, economic production of the products in clean rooms and controlled areas.
SABEU develops conceptual designs for:
SABEU offers different joining techniques for all membranes:
Because of the special manufacturing process, TRAKETCH® micro filtration membranes have capillary pores, which – unlike stretched or foamed membranes – have very precise diameters and a smooth surface.
TRAKETCH®Vent are characterized by a hydrophobic and oleophobic surface to achieve ideal venting. The air flow can be adjusted due to precisely defined pores.
TRAKETCH®Bio are ideal as surface filters for any application where cells and particles grow or need to be analyzed on the surface of the membrane, e.g. cell cultures in biotechnology applications as well as particles and microorganisms in environmental analysis.